HPE 3PAR StoreServ 10000 (formerly known as 3PAR V-Series or 3PAR V-Class)

Physical specifications:-

Feature Description

2 m cabinet

Dimensions (W x H x D) 60 x 194.3 x 91.3 cm (23.6 x 76.5 x 36 in)

Service clearance (Front and back) Front/Rear: 91.4 cm (36 in) / 76.2 cm (30 in)

Weight (Not populated) 214.1 kg (472.1 lb)

Maximum weight (Fully populated) 870.8 kg ( 1,919.8 lb)

Maximum weight per leveling foot 217.7 kg (480 lb)

Maximum load per leveling foot 14 kg/sq cm (200 lb/sq in)

Component weights

10400 Base configuration1 314.7 kg (693.9 lb)

10800 Base configuration1 356.9 kg (786.9 lb)

2 controller nodes (Fully populated) 60.4 kg (133 lb)

Drive chassis (Fully populated) 81.6 kg (180 lb)

Service processor 9.4 kg (20.8 lb)

Supported host FC connections

FC connector type from storage system to host port LC to LC

FC cable core diameter OM3 / OM4

Connector boot length Standard

Electrical specifications

Feature Description

Single phase power supply requirements

Input voltage (V ac) 220 (200 - 240)

Frequency (Hz) 50 - 60

Circuit breaker maximum 30 A per Power Distribution Unit (PDU) (De-rated to 24 A)

Power connectors for 2 m cabinet (4) L6-30P with 1+1 redundant or (4) IEC 60309-32A (332P6S) with 1+1 redundant

Power receptacles (4) L6-30R with 1+1 redundant or (4) IEC 60309 with 1+1 redundant

Three phase power supply requirements[NEMA (North America, Taiwan, Philippines and Japan)]

Input voltage (V ac) 200 - 240 p-p

Frequency (Hz) 50 - 60

Circuit breaker maximum 48 A per PDU (De-rated to 27.71 A per phase)

Power connectors for 2 m cabinet (2) IEC 309, 3-pole, 4-wire, blue, ground clocked to 3:00 with 1+1 redundant

Power receptacles (2) Hubbell HBL460C9 W or equivalent

IEC (International)

Input voltage (V ac) 200 - 240 p-n; 380 - 415 p-p

Frequency (Hz) 50 - 60

Circuit breaker maximum 32 A per phase per PDU

Power connectors for 2 m cabinet (2) IEC 309, 4-pole, 5-wire, red, ground clocked to 6:00 with 1+1 redundant

Power receptacles (2) Hubbell C532C6S or equivalent

Maximum potential power draw per 2 m cabinet

Watts per cabinet 9,984 W and 34,075 BTU/hr

Actual power draw/heat dissipation

Service processor 350 W and 1,193 BTU/hr

Drive chassis (Without drive magazines) 200 W and 683 BTU/hr

Solid State Drive (SSD) and drive magazine Transactional (W / BTU/hr) - Under maximum load Idle (W / BTU/hr)

4 x 1920GB SSD / encryption drive magazine 32.4 / 110.55 8.8 / 30

4 x 300GB 15K SFF SAS drive magazine 39/132 34/117

4 x 600GB 15K SFF SAS/encryption drive magazine 29.2/100.4 28/96

4 x 450GB 10K SFF SAS/encryption drive magazine 27.2/92.8 22/75.1

4 x 600GB 10K SFF SAS/encryption drive magazine 29.6/100.8 25.2/84.4

4 x 1.2TB 10K SFF SAS drive magazine 32.8/111.6 24.8/84.4

4 x 1.8TB 10K SFF SAS drive magazine 30/102.4 29.2/99.2

4 x 2TB LFF SAS/encryption drive magazine 46.4/158 26.4/89.6

4 x 4TB LFF SAS/encryption drive magazine 52.4/178.4 36.4/124.4

4 x 6TB LFF SAS/encryption drive magazine 57.2/195 47.6/162.8

Controller node pair 1,315/4,487 990/3,378

Example full cabinet configuration (4 - Node 10400; 4 drive chassis, 160 600GB drives,1 service processor) 6,787/23,184 5,697/20,400

Environmental specifications

Feature Description

Temperature "10° - 40°C (50° - 104°F) with 0 - 914.4 m (0 - 3,000 ft)

10° - 35°C (50° - 95°F) with 914.4 m - 3,048 m (3,000 - 10,000 ft)"

Altitude maximum 3,048 m (10,000 ft)

Humidity (%), non-condensing 20% - 80%

Raised floor Recommended

Emissions / RFI / EMI FCC class A, EN55022 class A,EN55024: 1998, VCCI class A

Safety CE mark, C-TUVus mark, TUV GS mark, CB scheme with all country deviations

Energy consumption efficiency (Japan green law)1 0.011

Operating vibration 0.25G, sine, 5 - 500 Hz, 0.1 g, random 10 - 100 Hz

Non-operating vibration 0.5G, 5 - 500 Hz, sine

Technical specifications

Feature Description

Block storage File storage

10400 (Old) 10400 (New) 10800 HPE StoreServ file controller v213

Number of controller nodes 2 or 4 2 or 4 2, 4, 6, or 8 Up to 8

HPE 3PAR Gen4 ASICs 4 or 8 4 or 8 4, 8, 12 or 16 NA

Management processors 4 - 8 Quad-core 2.83 GHz 4 - 8 Quad-core 2.83 GHz 4 - 16 Quad-core 2.83 GHz 1 - 16 Quad-core 2.4 GHz

Total cache 1.51 - 3.2TB 2.2 - 4.4TB 2.2 - 8.8TB None

Total flash cache (Optional)1 1.5 - 3TB 2 - 4TB 2 - 8TB None

Total on-node cache 96 - 192GB 192 - 384GB 192 - 768GB None

Maximum host ports 96 ports 96 ports 192 ports 4 - 128

8 Gb/s Fibre channel (FC) host ports1 0 - 96 ports 0 - 96 ports 0 - 192 ports NA

16 Gb/s FC host ports1 0 - 48 ports 0 - 48 ports 0 - 96 ports NA

10 Gb/s iSCSI host ports2 0 - 16 ports 0 - 16 ports 0 - 32 ports NA

10 Gb/s FCoE host ports3 0 - 48 ports 0 - 48 ports 0 - 96 ports NA

1/10 GbE network ports NA NA NA 4 - 128

Built-in Remote Copy (RCIP) ports4 2 - 4 ports 2 - 4 ports 2 - 8 ports None

Number of drives 165 - 960 drives 165 - 960 drives 165 - 1920 drives 2

Raw capacity (Approximate)6 4.84 - 1600 TB7 4.84 - 1600 TB7 4.84 - 3200 TB7 2x450GB for O/S mirror

Capacity Details

RAID levels RAID 0, 1, 5, MP5 RAID 0, 1, 5, 612

RAID 5 data to parity ratios 2:1 - 8:1 2:1 - 8:112

RAID 6 data to parity ratios 4:2, 6:2, 8:2, 10:2, 12:2, 14:2 4:2, 6:2, 8:2, 10:2, 12:2, 14:212

Drive capacities (Approximate GB4)(RAID levels, parity ratios, and drive capacities all mixable within the same storage system) 480 MLC SSD6, 920 MLC SSD6, 1920 SSD SSD6, 300 15K FC, 600 15K FC, 300 15K SAS7, 600 15K SAS7, 450 10K SAS7, 600 10K SAS7, 900 10K SAS7, 1200 10K SAS7, 1800 10K SAS7, 2000 7.2K SAS NL8, 4000 7.2K SAS NL8, 6000 7.2K SAS NL8 NA

Number of drive chassis(Each drive chassis holds up to 40 drives in 4U) 29 - 24 chassis 29 - 48 chassis NA

Maximum weight per leveling foot 217.7 kg (480 lb)

Maximum load per leveling foot 14 kg/sq cm (200 lb/sq in)

Component weights

10400 Base configuration1 314.7 kg (693.9 lb)

10800 Base configuration1 356.9 kg (786.9 lb)

2 controller nodes (Fully populated) 60.4 kg (133 lb)

Drive chassis (Fully populated) 81.6 kg (180 lb)

Service processor 9.4 kg (20.8 lb)

Supported host FC connections

FC connector type from storage system to host port LC to LC

FC cable core diameter OM3 / OM4

Connector boot length Standard

‍