HPE D2600 Disk Enclosure
Configure & Buy
Need Service Right Now?
HPE D2000 Disk Enclosures - Specifications:-
D2600/D2700 Disk Enclosure
Dimensions (H x W x D) 8.8 x 45.0 x 56.7 cm (3.47 x 17.99 x 22.3 in)
Weight "Base unit: 17.2 kg (38 lb)
With all drives: 27.2 kg (59.97 lb)
with all SFF drives: 24.9 kg (54.90 lb)"
NOTE: This is for both D2600 and D2700 disk enclosure
Operating 10° to 35°C (50° to 95°F)
Shipping -40° to 66°C (-40° to 150°F)
Operating 10% to 90%
Non-operating Up to 95%
Heat dissipation2 (Maximum) 1331/Btu/hr.1160.Btu/hr
NOTE: 1: Rated 1°C per 1000 feet of elevation to 10,000 ft2: Standard conversion from W to Btu/hr = 3.413 Btu/hr per W
Rated input voltage 100 to 240 V ac
Rated input frequency 50 to 60 Hz
Rated input current 2.68 A 115 V ac (Typical), 4 A (Maximum)
Input power (Max: 280 V ac) "390 W (D2600)
340 W (D2700"
LED indicators for HDDs "Online (Bottom)
Drive failure/ID (Top)"
LED indicators on front panel "Heartbeat LED
LED indicators on rear panel "I/O module LED (2) identify/on/fault; port (2) link good/ link fault
Power on/standby button/system power LED
Power supply LED"
Host interface 4 x wide SAS 6 Gb/s ports
Maximum number of drives "Up to 12 3.5 in (D2600) or 25 2.5 in (D2700) SAS or SATA drives
Up to 25 2.5 in (2700) SSD"
RAID support "See QuickSpecs for Smart Array controllers P212, P411, P812, P222 and P421
P2000 G3 FC modular Smart Array system"
Upgradeable firmware Yes, offline only. Firmware updates available through hp.com
Disk drives and enclosure protocol support HPE 3.5 in (D2600) or 2.5 in (D2700) SAS 6 Gb/s
Connector type IPass (Mini-SAS)
Number of ports Two (One IN, other is OUT)