HPE Integrity BL890C i4

Physical specifications:-

Specification Description

Dimensions (H x W x D) 36.63 x 20.82 x 48.51 cm (14.42 x 8.29 x 19.10 in)

Shipping dimensions(H x W x D) 54.61 x 40.49 x 66.04 cm (20.50 x 15.94 x 26.00 in)

Weight Maximum 48.08 kg (106 lb)

Technical specifications

Specification Description

SAS RAID HPE p410e Controller

Disk drive and enclosure interface 3Gb SAS (Serial attached SCSI)

SAS connectors 8 internal (SFF8484) x4 wide port connector

Cache memory speed DDR2-800 memory provides up to 4.2 GB/s maximum bandwidth

Server interface X1 5.0 Gb/s PCIe provides 1 GB/s maximum bandwidth

SAS speed Eight x 1 3G SAS provides 2400 MB/s maximum bandwidth

Cache memory Four (4) integrated SAS read only 512MB cache, one per HPE Smart Array p410i SAScontroller

Logical drives supported Up to 32 logical volumes

Maximum logical drive capacity Up to 64 logical

Host memory addressing 64-bit, supporting greater than 4GB server memory space

RAID support RAID 0 (Striping) and 1 (Mirroring), and RAID 0+1 (Mirrored and striped) (Not supported with BL8x0c i6 blades)

Upgradeablefirmware Upgradeable firmware with recovery ROM features online drive flash requires 256MB, 512MB, or 1GB cache module

Embedded Dual NC553i 10Gb 2-port FlexFabric NICs with Flex-10 support

Network interface 10000Base-Sx

Compatibility IEEE 802.3ib QoS 802.3x flow control, and 802.3ap 10G Base-KR

Data transfer method PCI Express, four lanes (x4)

Network transfer rate (Theoretical maximum values) 1 Dual 10Gb ports offer up to 40 Gb/s bidirectional theoretical throughput

Environmental specifications

Specification Description

Operating temperature 10° to 35°C (50° to 95°F)

Non-operating temperature -40° to 60°C (-40° to 140°F)

Storage temperature -20° to 60°C (-4° to 140°F)

Maximum Wet Bulb Temperature 30°C (86°F)

Relative humidity

Operating relative humidity 15% to 80%

Shipping temperature 10% to 90%

Storage temperature 10% to 90%

‍