HPE Proliant DL380E G8

HP ProLiant DL380e Gen8 Server series - Specifications :-

Physical specifications

Feature Description

Dimensions - with bezel (H x W x D) "Small Form Factor (SFF) drives: 8.75 x 44.55 x 69.85 cm (3.44 x 17.54 x 27.5 in)

Large Form Factor (LFF) drives: 8.75 x 44.55 x 74.94 cm (3.44 x 17.54 x 29.5 in)"

Weight (approximate) "Maximum: 32.30 kg (71.20 lb)

Minimum: 14.00 kg (30.80 lb)"

Electrical specifications

Feature Description

Input requirements

Rated line voltage "100 to 120 V ac

200 to 240 V ac"

Rated input current "For 1200 W power supply:
10 A (at 100 V ac)

4.9 A (at 200 V ac)

For 750 W power supply:
8.9 A (at 100 V ac)

4.3 A (at 200 V ac)

For 460 W power supply:
5.5 A (at 100 V ac)

2.6 A (at 200 V ac)"

Rated input frequency 50 to 60 Hz

Rated input power "For 1200 W power supply:
930 W (at 100 V ac)

1348 W (at 200 V ac)

For 750 W power supply:
857 W (at 100 V ac)

824 W (at 200 V ac)

For 460 W power supply:
526 W (at 100 V ac)

505 W (at 200 V ac)"

BTU rating (maximum) "For 1200 W power supply:
3530 Btu/hr (at 100 V ac)

4600 Btu/hr (at 200 V ac)

For 750 W power supply:
2925 Btu/hr (at 100 V ac)

2812 Btu/hr (at 200 V ac)

For 460 W power supply:
1794 Btu/hr (at 100 V ac)

1725 Btu/hr (at 200 V ac)"

Power supply output (per power supply)

Rated steady-state power "For 1200 W power supply:
800 W (at 100 V ac)

900 W (at 120 V ac)

1200 W (at 200 to 240 V ac)

For 750 W power supply:
750 W (at 100 to 120 V ac)

750 W (at 200 to 240 V ac)

For 460 W power supply:
460 W (at 100 to 120 V ac)

460 W (at 200 to 240 V ac)"

Maximum peak power "For 1200 W power supply:
800 W (at 100 V ac)

900 W (at 120 V ac)

1200 W (at 200 to 240 V ac)

For 750 W power supply:
750 W (at 100 to 120 V ac)

750 W (at 200 to 240 V ac)

For 460 W power supply:
460 W (at 100 to 120 V ac)

460 W (at 200 to 240 V ac)"

Environmental specifications

Feature Description

System inlet temperature (operating) "10° to 35°C (50° to 95°F), at sea level with an altitude derating of 1.0°C per every 304.8 m (1.8°F per every 1000 ft) above sea level to a maximum of 3048 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or above 30°C (86°F)."

System inlet temperature (non-operating) -30° to +60°C (-22° to +140°F). Maximum rate of change is 20°C/hr (36°F/hr).

Relative humidity (operating) 10% to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing

Relative humidity (non-operating) 5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing

Altitude (operating) 3048 m (10,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min)

Altitude (non-operating) 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min)

Acoustic noise1 "Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
  1P Non- Redundant SKU
2P Redundant SKU
LWAd
5.8 B
5.4 B
LpAm
41 dBA
38 dBA
Operating
  1P SKU
2P SKU
LWAd
5.9 B
5.7 B
LpAm
42 dBA
41 dBA"

1. The Listed sound levels apply to standard shipping configurations. Additional options may result in increased sound levels.

Emissions Classification (EMC)

Feature Description

FCC rating Class A

Normative standards CISPR 22; EN 55022; EN 55024; FCC CFR 47, Pt 15; ICES-003; CNS14336-1; CNS13438; GB4943; GB9254; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1

Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.The listed sound levels apply to standard shipping configurations. Additional options may result in increased sound levels.

HP Dynamic Smart Array B120i Controller

Feature Description

Dimensions Embedded

Disk drive and enclosure interface - Transfer rate Up to 6 Gb/s SATA (Serial ATA)

SAS connectors 6 internal SATA connectors

Server interface x4 PCIe 2.0

SAS speed 6 Gb/s SATA links

Cache memory Zero Memory RAID has no cache memory

Logical drives supported Up to 8 logical volumes (6 physical drives)

Host memory addressing 64-bit, supporting greater than 4GB server memory space

Hot plug support Yes

RAID support RAID 0 (Striping), RAID 1 (Mirroring)

RAID 1+0 (Striping & Mirroring)

HP Dynamic Smart Array B320i Controller

Feature Description

Dimensions Embedded

Disk drive and enclosure interface - transfer rate Up to 6 Gb/s SATA (Serial ATA)

SAS connectors 2 internal x4 connectors

Server interface x4 PCIe 2.0

SAS speed 6 Gb/s SAS links

Cache memory Zero Memory RAID has no cache memory optional 40-bit 512MB ECC protected Flash Backed Write Cache (FBWC)

Logical drives supported Zero Memory, Up to 2 logical volumes (6 physical drives)

Host memory addressing 64-bit, supporting greater than 4GB server memory space

RAID support RAID 0 (Striping), RAID 1 (Mirroring)

RAID 1+0 (Striping & Mirroring)

RAID 5 with optional 512MB FBWC1

1. 512MB cache is required to enable RAID 5 support. No SAS supported.

HP Smart Array P420 Controller

Feature Description

Dimensions Low profile PCIe form factor

Disk drive and enclosure interface - transfer rate 6 Gb/s SAS (Serial Attached SCSI)

3 Gb/s SATA (Serial ATA)

SAS connectors 2 internal 4X connectors

Cache memory speed DDR2-800 MHz with 40 or 72-bit wide bus

Server interface x4 PCIe 2.0 provides 2 GB/s maximum bandwidth

SAS speed Eight 6 Gb/s SAS links provide 4.8 GB/s maximum bandwidth

Cache memory Zero memory RAID has no cache memory

40-bit 256 MB ECC protected cache (battery upgrade available)

72-bit 512MB BBWC or 72-bit 512MB and 1G FBWC

Zero memory, Up to 2 logical volumes (8 physical drives)

Logical drives supported Up to 64 logical drives with cache

Host memory addressing 64-bit, supporting greater than 4GB server memory space

RAID support RAID 6, 60 (Advanced data guarding)

RAID 5, 50 (Distributed data guarding)1

RAID 1+0 (Striping & Mirroring)

1. Either a minimum of 256MB cache and battery kit or a minimum of 512MB BBWC/FBWC is required to enable RAID 5, 50, 6, 60. HP Smart Array Advanced Pack (SAAP 2.0) is no longer required to enable 6 & 60 (Advanced Data Guarding). However, controller must be in firmware version 4.68 (or later).

HP Ethernet 1Gb 4-port 366i Adapter

Feature Description

Network interface 10Base-T/100Base-TX/1000Base-TX

Compatibility "IEEE 802.3 10Base-T

IEEE 802.3ab 1000Base-T

IEEE 802.3u 100Base-TX

IEEE 1588, IEEE 802.1AS

IEEE 802.3az - Energy Efficient Ethernet (EEE)"

Data transfer method PCI Express v 2.0, 5.0 GT/s, two lanes (x2)

Controller Intel I350 Powerville

Network transfer rate "10Base-T (Half-Duplex)
10 Mb/s per port, 40 Mb/s combined
10Base-T (Full-Duplex)
20 Mb/s per port , 80 Mb/s combined
100Base-TX (Half-Duplex)
100 Mb/s per port, 400 Mb/s combine
100Base-TX (Full-Duplex)
200 Mb/s per port, 800 Mb/s combined
1000Base-TX (Half and Full-Duplex)
1000 Mb/s per port, 4000 Mb/s combined"

Connector Two RJ-45

Cable support "10Base-T
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX
Category 5 or higher UTP; up to 328 ft (100 m)"

‍